Kutai EA341

Permanent Magnet Generator Automatic Voltage Regulator\r\n\r\nEA341 Permanent Magnet Generator type voltage regulator is a compatible replacement for Newage Stamford MX341 and Onan 305-0846.', '

Voltage Regulation < ±1%
3 Phase PMG Power Input
For Use In Parallel Operation
Adjustable EXC TRIP, DIP, TRIM & DROOP Functions
Soft Start Voltage Ramping
Under Frequency Roll Off Protection
UFRO & Over Excitation LED Indicators

Sensing Input	Voltage 190~264 VAC 1 phase 2 wire Frequency 50/60 Hz selectable
Power Input(PMG)	Voltage 170~220 VAC 3 phase 3 wire Current 3A / phase Frequency 100~120 Hz nominal
Output	Voltage Max. 120 VDC Current Continuous 2.7A, Intermittent 6A for 10 sec. Resistance Min. 15 Ohm
Voltage Regulation	< ±1% (with 4% engine governing)
Voltage Build-up	Residual volts at AVR terminal > 5 VAC
External Volts Adjustment	±10% with 1 K Ohm 1 watt trimmer
Unit Power Dissipation	Max. 12 watt
Thermal Drift	0.05% per °C change in AVR ambient
Soft Start Ramp Time	3 sec.
Analogue Input	Max. input ±5 VDC Sensitivity 1V for 5% generator volts Input Resistance 1 K Ohm
Droop Input	Burden 10 Ohm Max. sensitivity 0.07A for 5% droop (PF=0) Max. input 0.33A
Under Frequency Protection (Factory Setting)	Set point 95% Hz Slope 170% down to 30 Hz
Current Limit Input	Burden 10 Ohm Sensitivity Range 0.5~1A
Over Voltage Detector Input	Set point 300V Time delay 1 sec. (fixed) CB trip coil volts 10~30 VDC / 0.5 Amp
Over Excitation Protection	Set point 90 VDC Time delay 10 sec. (fixed)
Environment	Operating Temperature : -40~70 °C Storage Temperature : -40~85 °C Relative Humidity : Maximum 95% Vibration : 3.3G @ 100~2 KHz
AVR Controls Functions	VOLT : Voltage Adjustment STAB : Stability Adjustment U/F : UFRO Knee point Set DROOP : Droop Adjustment TRIM : Analogue Input Adjustment EXC TRIP : Over Excitation Level Set DIP : U/V Rate Set
Dimensions	150.0 (L) x 135.0 (W) x 48.0 (H) mm
Weight	394g ±2%

Download