Kutai EA440

Kutai EA440
  • Voltage Regulation < ±1%
  • Can Be Use In Parallel Operation
  • Adjustable DIP, TRIM & DROOP Function
  • Under Frequency Roll Off Protection
  • Sensing Voltage Loss Protection
  • Under Frequency LED Indicator
  • Soft Start Voltage Ramping

Sensing Input Voltage 190~264 VAC 1 phase 2 wire
Frequency 50/60 Hz selectable
Output Voltage Max. 90 VDC at 207 VAC
Current Continuous 4A, Intermittent 10A for 10 sec.
Frequency Min. 15 Ohm
Voltage Regulation < ±1% (with 4% engine governing)
Voltage Build-up Residual volts at AVR terminal > 5 VAC
External Volts Adjustment ±8% with 1 K Ohm 1 watt trimmer
Unit Power Dissipation Max. 12 watt
Thermal Drift 0.04% per °C change in AVR ambient
Under Frequency Protection (UFRO) Set point 95% Hz
Slope 170% down to 30 Hz
Soft Start Ramping 2 sec.
Analogue Input Max. Input ±5 VDC
Sensitivity 1V for 5% generator volts
Input Resistance 1 K Ohm
Droop Input Burden 10 Ohm
Max. sensitivity 0.07A for 5% droop (PF=0)
Max. input 0.33A
Environment Operating Temperature : -40~70 °C
Storage Temperature : -40~85 °C
Relative Humidity : Maximum 95%
Vibration : 3.3G @ 100~2 KHz
AVR Controls Functions VOLT : Voltage Adjustment
STAB : Stability Adjustment
U/F*: To Set the U/F Knee Point
(*U/F: Under Frequency Protection)
DROOP : Droop Adjustment
TRIM : Analogue Input Adjustment
DIP : U/V Rate Set
Dimensions 150.0 (L) x 135.0 (W) x 48.0 (H) mm
Weight 418g ±2%
Brochure Download
Copyright MAXXmarketing Webdesigner GmbH
Unit 22 - Industrial Estate
Station Rd
Ditton Priors
Bridgnorth
Shropshire
WV16 6SS
United Kingdom

This email address is being protected from spambots. You need JavaScript enabled to view it.
Tel: +44 (0)1746 712670
Fax: +44 (0)1746 712746
map
This email address is being protected from spambots. You need JavaScript enabled to view it.